EXPLORER LR 4'' FRAME PARTS
Avec un drone comme le Explorer LR4 le long range est un plaisir de tous les instants.
This is great fc.put it in my flywoo explorer, has all the uarts I need,works really good.the only drawback is it gets hot fast.yuo need to start flying very soon after powering up.
is nice fly
That cli dump file is is for the F7. took me hours to figure out the correct one, softserial is a pain in the butt, please change the wire harness to actual uarts. I like the design don't know how it performs yet. I've tried 3 different air units, and had issues, just when i thought i figured it out, i got a solid red light and i thought DJI air unit was bricked. tried two others I have,, same thing. After some research i found out it was a bad 9v pin on the connector. Hard wired to board and is working for now. The connector is also backward order of the DJI unit, which means the dozens of pre made harnesses i have for air units and "DJI ready" FCs, were useless, so I had to make one.
This AIO board and the RTF Hex Nano are the first ever products I've purchased, and the Hex Nano caught fire ( it was a true RTF, vista model, didn't touch it with a soldering iron) the first time i plugged it in. The customer service at Race Day Quads was top notch, so we'll see if the replacement works or if it's strike 3.
Assembling it is a slight challenge for a total novice, but after doing some research, everything slowly starts to make sense. Besides, Flywoo's awesome technical support was able to help me with every single problem that I couldn't solve myself. Hats off, you are true pros at what you do!
The drone itself flies for 9 minutes on a 850mAh battery with GoPro 4 Silver without the waterproof case and can definitely be used for long range (although I kind of regret not getting it with crossfire). Looking forward to using it with my 3000 mAh Li-ion batteries :). Totally worth the money!
Everything is OK. Thank you.
Turns my Hexplorer into a great long range platform for a full sized gopro or 360r
I bought this quad on impulse after seeing it advertised on YouTube. I am amazed by how much fun I am getting from such a small package. Very reliable and I bring it everywhere now in case I get a chance to fly. My favourite drone by far.
Back in Stock FLYWOO ROBO RB 1202.5 5500kv \11500kv 1.5mm shaft FPV Motor
Picked up 4 in 3750kV for 4" Navigator frame build for 3s.
With 4024 2-blade props with 3s, these are easily the quietest and smoothest motors I have; hovering a few meters away, you can barely hear it. A real deal for your lightweight build.
(Reviewers who didn't award 5 stars were concerned about scrambled specs on this web page, or the effect of unplanned encounters with sand -- not criticizing the product.)
Saw this on sale for $30 and had to give it a go. Prior experience building up an Explorer frame really impressed me with Flywoo's quality engineering and clever design.
This frame supports 5" props and 30.5mm electronics. Minimum vertical clearance is 23mm (at rear) to 26mm (at front) from the component mounting lugs to the aluminum over-frame will allow up to a 3-layer stack, depending on height of your boards. As the lugs and sub-frame board are separated by the 5mm arms, it may be possible to put small, thin components underneath the lugs below the bottom of your stack.
My assembled frame with no components (or strap) added tipped my scale at 91.7 grams, a tad more than spec, but still pretty light for such a robust and rigid frame.
Beefy 5mm stretch-X arms from a 130x175mm box, CTC, and have solid motor protective extensions with neatly chamfered edges. Other CF parts are beefy, too; crisply and very cleanly cut, but not sharp. Fit is very close indeed, making an extremely rigid airframe when all the screws are tightened.
Over-frame is cleverly designed so that you can remove to screws from the bottom, and loosen two at top rear, then swing the entire canopy up and over, to expose the entire interior space. Plenty of room for camera, 19mm width, or 25mm, depending on which way you install the over-frame.
Crab is designed for a top-mounted battery. The frame kit did not include a battery pad, something you will want to add. 1000-1300 3s/4s fit nicely on the top deck. (Figuring a good place and method to mount a GPS may be a bit of a challenge.)
It really looks like it should take a ton of abuse, with well-protected hardware.
This is my second Flywoo frame kit.
If it looks tempting for your purpose, do not hesitate.
I have purchased 4 HD Quadcopters so far and every single one of them was perfect! Because of there build quality and pricing I will only buy from them.
Mounted this in a 4” Fouride and I’ve given that quad hell, no problems with the board yet.
High quality as always