(1MB FLASH) GOKU GN 745 40A AIO BL_32 V1.2 (MPU6000 ) 25.5 X 25.5 5V/9V

In stock
  • Description
  • Reviews
  • Description

    FLYWOO new top GOKU series AIO are finally here! GOKU GNF745 40A FC is currently the highest level of all-in-one FC, which can meet all your FPV needs.

    Use powerful F745 BGA chip and BLHELI_32 ESC firmware, integrate 5V/9V dual BEC, barometer, black box, WS2812LED, support 7 complete hardware serial ports, I2C and other functions are all open.
    This is currently the most integrated and powerful FC AIO board on the market. It brings pilots a more stable and smoother flight.! Perfect for ultralight quad! It will be the most powerful FC AIO board in 2021.

    Main Changelog from V1 to V1.2 : 

    • Improve the land layout. Increase the pad spacing, easier to sol
    • Upgrade to 1MB flash


    • F745 MCU
    • Barometer
    • Dual BEC 5V/9V
    • Black Box
    • 40A 32Bit ESC
    • 7 UARTS

    GN745 AIO Flight Controller

    • MCU: STM32F745 32-bit processor,216MHz, 1MB Flash
    • IMU: MPU6000 (SPI)
    • Barometer: BMP280
    • Onboard LED:WS2812*4
    • USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
    • 7 hardware UARTS (UART1,2,3,4,5,6,7)
    • Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
    • PPM and PWM receivers are not supported.
    • Onbord 8Mbytes for Blackbox logging
    • 9V Power Out: 1.5A max
    • 5V Power Out: 2.0A max
    • 3.3V Power Out: 0.5A max
    • Dimensions: 33.5x33.5mm
    • Mounting Holes: Standard 25.5/26.5mm square to center of holes
    • Weight: 8.5g

    Built-in 40A BL_32 4in1 ESC

    • Support BLheli / BLHELI_32
    • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200
    • Input Voltage: 2-6S Lipo
    • Continuous Current: 40A
    • Firmware: BLHELI_32

    Q&A : 
    1、 Betaflight Firmware target: FLYWOOF745
    2、INAV Firmware target: FLYWOOF745
    3、GOKU GN 745 40A AIO BL_32 Wiring Diagram  : ( LINK )

  • Reviews
  • Customer Reviews

    Based on 11 reviews
    Michael Fye


    Robert K.
    Excellent but has gotten too expensive

    In my opinion, this is the best AIO out right now. It is particularly fantastic for HDZero builds. The 9V BEC makes for super clean video and I never worry about voltage spikes hurting my VTX. It has been fantastic in my 4S builds in particular.

    Its great to have a Blackbox at all on such a full featured AIO but if I was going to make one improvement request, I would love to see this hit 16mb for being able to get a little more logging done before needing to clear.
    The pads are very small and take a lot of patience BUT I am pretty sure this is just a requirement of packing everything else in.
    The price has been on a slow rise for a few months. $140 is just too much for me, 120 was already pushing it. There are ultimately several other very good options for quite a bit cheaper now.

    Summary: Absolutely excellent with very few drawbacks other than price.

    Pascal Wyss

    Great FC... i fly this FC in a Ultralight 6s Quad with DJI and GPS works great. its easy to solder and the PCB Layout for me is perfect. THX Flywoo

    Best AIO so far …

    Powerful. Enough uarts and bl_heli32. And superfast delivery to Germany 🇩🇪

    Takes a beating

    Mounted this in a 4” Fouride and I’ve given that quad hell, no problems with the board yet.

    Payment & Security

    American Express Apple Pay Mastercard PayPal Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Estimate shipping

    You may also like

    Recently viewed