Use powerful F722 chip and BLHELI_S ESC firmware, integrate 5V/9V dual BEC, barometer, black box, WS2812LED, support 7 complete hardware serial ports, I2C and other functions are all open.
Specifications
- MCU: STM32F722 32bit processor,216MHz, 512Kbytes Flash
- IMU: ICM42688
- Barometer: BMP280
- Onboard LED:WS2812*4
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 6 hardware UARTS (UART1,2,3,4,5,6)
- Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
- PPM and PWM receivers are not supported.
- Onbord 16Mbytes for Blackbox logging
- 9V Power Out: 1.5A max
- 5V Power Out: 2.0A max
- 3.3V Power Out: 0.5A max
- Dimensions: 41x32mm
- Mounting Holes: Standard 20mm square to center of holes
- Weight: 8.5g
- Built-in 40A BL_S 4in1 ESC
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300,Dshot600
- Input Voltage: 2-6S Lipo
- Continuous Current: 40A
- Firmware: BLHELI_8
Q&A :
1、 Betaflight Firmware target: FLYWOOF7DUAL
2、INAV Firmware target: FLYWOOF7DUAL
3、GOKU GN722 HD EVO 40A AIO Wiring Diagram : ( LINK )