Flywoo Goku F4 35A 16X16 STACK, the smallest size! Large output current!
If you don't like AIO, but want to build an ultralight 3'' -5'' racing quads , it can definitely meet your FPV needs!
This will be the best ultralight mini stack in 2021!
FC uses F411 chip, 2 hardware serial ports, 2 software serial ports,
4 WS2812 LEDs, black box, I2C, 5V/2A BEC.
ESC uses BLS , supports DSHOT600 built-in current sensor, supports up to 6S input, and maximum current is 35A.
high-performance processors, powerful current output.
GOKU411 V2.1 Stack 35A BLHELI_S
IMU: MPU6000 (SPI)
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
2 hardware UARTS (UART1,2)
2 Software serial port
1 I2C port for compass/baro
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onbord 8Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Mounting Holes: Standard 16mm square to center of holes
Built-in 35A BL_S 4in1 ESC
Support BLheli / BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input Voltage: 2-6S Lipo
Continuous Current: 35A
How do you set up the LED's on the ESC the directions are unreadable. the Red lettering above the ESC on the right side in your picture. it says something about wiring a 5v line and the LED line on the ESC. Please explain. I would very much like to get this working
Please contact our technical support, he will help you
Although this stack looks nice, after wiring it up, the ESC does not work. I checked all solder connections and they are all good; no issues with soldering. I then separated the FC and ESC boards to determine where the problem might be. The ESC board appears to NOT to be working. If I can get just the ESC board, I will give it another try.
pls contact our tech support firstname.lastname@example.org . he will help you :)
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.